S&S CYCLE - 34-7004/Heavy-Duty Connecting Rod Sets - Connecting Rod - Big Twin '41-E'81
Features
- High-quality, heavy duty rod sets come complete and ready to install
- Set includes front and rear rods, crankpin and nuts, steel cages and roller bearings
- Crankpin has two oil holes and four slots ground on each side of the throw ends of the rods to help maintain the oil film on thrust faces
- Rods are deep-forged and heat-treated, 0.120" wider than stock in the I-beam section and feature rod-to-rod clearance to accommodate strokes up to and including 5.00"
- Made in the USA
Note
- Installation of rod sets may require additional clearancing of flywheels and cases.
Specs
| Product Name | Connecting Rod Assembly |
| Style | Heavy Duty |
| Material | Steel |
| Units | Set |
| Riding Style | Street |
Fitments
| 1979-1980 | Harley-Davidson | 1200 Fat Bob FXEF | - |
| 1979-1980 | Harley-Davidson | 1200 Super Glide FXE | - |
| 1979 | Harley-Davidson | 1200 Low Rider FXS | - |
| 1977-1978 | Harley-Davidson | FXS Low Rider | - |
| 1974-1978 | Harley-Davidson | FXE Super Glide | - |
| 1971-1978 | Harley-Davidson | FX Super Glide | - |
| 1970-1977 | Harley-Davidson | FLH Electra Glide | - |
| 1965-1981 | Harley-Davidson | Electra Glide FL
|
Notes: 1981
Fits Early 1981. |
| 1965-1969, 1978-1980 | Harley-Davidson | 1200 Electra Glide FLH | - |
| 1958-1964 | Harley-Davidson | Duo Glide FL | - |
| 1958-1964 | Harley-Davidson | FLH Duo-Glide | - |
| 1953-1957 | Harley-Davidson | Hydra Glide EL | - |
| 1949-1952 | Harley-Davidson | EL | - |
| 1949-1951, 1953-1957 | Harley-Davidson | Hydra Glide FL | - |
| 1941-1979, 1981 | Harley-Davidson | FL
|
Notes: 1981
Fits early models. |
| 1941-1950 | Harley-Davidson | F | - |
| 1941-1947 | Harley-Davidson | Knucklehead FL | - |
Fitment Disclosure
This quick reference fitment information is provided to direct you to our catalog information and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.
General Safety Warning
Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, LeMans Corporation accepts no liability for loss or damage resulting from errors or omissions.
Periodically cleaning of your wheels is necessary to maintain a high luster, especially 24K gold plated wheels these require extra care. Always clean using a mild dish soap and water such as Dawn and a clean microfiber cloth, to clean inside the hub and spokes use a soft horse hair paint brush. NEVER use any harsh cleaning compounds or waxes as the are abrasive and will remove the gold plating. During storage spray a light coating of WD40 on the wheels to prevent rusting.
