Icon Airflite™ Flyboy Helmet
Airflite™ Flyboy Helmet
Features:
- Injection molded polycarbonate shell for strength
- Multiple oversized intake and exhaust ports
- Fog-Free Dropshield™ with exterior switch
- Quick-change Fog-Free Fliteshield™ with side plates
- Removable molded breath deflector and chin curtain
- Recessed twin channel supervent cooling system
- The Dropshield™ visor must only be used while the main face shield is in the fully closed position
- Internal speaker pockets work with ICON's R.A.U. Bluetooth device
- Removable Hydradry™ moisture wicking liner
- Includes Clear Fliteshield™ and RST Blue Forceshield™
- Includes Dark Smoke Dropshield™
Certifications
- Meets ECE 22.05 and DOT FMVSS-218 Standards
Choosing the Correct Helmet Size
Helmet fit is critical to helmet protective performance. Different helmets fit differently due to differences in design and construction. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on in a store, before purchasing it, to be sure you are purchasing the correct sized helmet for you.
Helmet Sizing Information
To achieve proper helmet fitment, begin by finding your head circumference size using the method described. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheekpads should fit firmly around your face. Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Different thickness cheekpads can be purchased to obtain the best fit.
Head Measurement Instructions
Wrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size in the chart to the right.
Sizing information is provided by the manufacturer and does not guarantee a perfect fit. Please use this chart as a guide only
Periodically cleaning of your wheels is necessary to maintain a high luster, especially 24K gold plated wheels these require extra care. Always clean using a mild dish soap and water such as Dawn and a clean microfiber cloth, to clean inside the hub and spokes use a soft horse hair paint brush. NEVER use any harsh cleaning compounds or waxes as the are abrasive and will remove the gold plating. During storage spray a light coating of WD40 on the wheels to prevent rusting.