ANDREWS - 214040/PB+ Cams - Cams - PB+ - XL
Features
- Bolt-in four-cam set
- More horsepower and torque
- Stock springs OK to 7000 rpm, requires no headwork
- Made in the U.S.A.
Notes:
- Installer must check coil bind, valve-to-valve clearance, valve-to-piston clearance and cam lobe to case clearance.
Specs
| Product Name | Cam Kit |
| Application | Exhaust / Intake |
| Grind | PB+ |
| Intake Lift | 0.400" |
| Intake Open | 34° |
| Intake Close | 40° |
| Intake Duration | 254° |
| Intake Lift at TDC | 0.208" |
| Intake Lobe Centerline | 93° |
| Exhaust Lift | 0.410" |
| Exhaust Open | 43° |
| Exhaust Close | 31° |
| Exhaust Duration | 254° |
| Exhaust Lift at TDC | 0.208" |
| Exhaust Lobe Centerline | 96° |
| Units | Set |
| Riding Style | Street |
Fitments
| 1959-1970 | Harley-Davidson | XLH900 |
| 1958-1970 | Harley-Davidson | XLCH |
| 1957-1958 | Harley-Davidson | Sportster 900 XLH |
Fitment Disclosure
This quick reference fitment information is provided to direct you to our catalog information and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.
General Safety Warning
Failure to follow manufacturer's recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, LeMans Corporation accepts no liability for loss or damage resulting from errors or omissions.
Periodically cleaning of your wheels is necessary to maintain a high luster, especially 24K gold plated wheels these require extra care. Always clean using a mild dish soap and water such as Dawn and a clean microfiber cloth, to clean inside the hub and spokes use a soft horse hair paint brush. NEVER use any harsh cleaning compounds or waxes as the are abrasive and will remove the gold plating. During storage spray a light coating of WD40 on the wheels to prevent rusting.